Microsoft Word instructions

Please download the ACM “ACM_sigconf” sample/template word document from ACM here.

We strongly encourage you to review the sample file above so you will be aware of the mandatory sections, copyright strip information (see next step), formatting requirements, font requirements, font sizes, and spacing required for the final version.

The correct ACM DEBS 2019 copyright-permission notice needs to be inserted in the sample files above, see page 1, bottom of column 1 before you submit your final version. The ACM rights management process will email the lead author this information when the online ACM copyright form is completed. There are three different forms of copyright block. ACM rights management system will automatically send you the correct copyright text based on the form you choose. A custom DOI URL will also be included in that email.

Please double-check that your produced document matches the details in the email sent you by the rights management system, and that you have included your full DOI URL.

This statement must be in 7 point Libertine font, with the first paragraph text justified, with DEBS ‘19 (the venue acronym) in italics. Refer to the ACM_SigConf.pdf sample file to view how the ACM copyright statement should appear.

LaTeX instructions

Note: the main problem that occurs with submissions generated with pdflatex is that the fonts are not embedded properly. This most often occurs because vector images included from your LaTeX do not themselves embed their fonts. If we find problems with your PDF, and you are unable to submit a revised version with correctly embedded fonts, we may have to take a less desirable and less safe route: that you submit a PostScript (PS) version, from which we produce PDF.

Please use the “sigconf” proceedings template in the acmart class that you find under 2017 ACM Master Article Template for your submission.

The new ACM rights management options mean that the acmart class does not automatically generate the correct copyright block, but you can use some predefined templates. Therefore, please download the acmcopyright.sty from the ACM template page as well. The email received from the ACM rights management system will have informed you of your specific DOI. Unlike in the past, this now needs to be included in your copyright block. There are three different forms of copyright block. You must use the one corresponding to what you selected during the rights management process.

Please double-check that your produced document matches the details in the email sent to you by the rights management system, and that you have included your full DOI URL.

Type 1 or TrueType fonts must be used (this will usually happen by default).

Type 3 fonts are not permitted. TrueType fonts are permitted, but will be tested for any problems which may need to be rectified. For help on obtaining the correct type of fonts, see this hint in the ACM FAQ list.

Inserting the following commands before your \begin{document} will improve the page layout:

• \clubpenalty=10000
• \widowpenalty=10000

Mandatory fields for your submission’s preparation and submission page fields

Please continue reading for additional information on preparing your final paper including the requirements for Page Size, File Naming Scheme, ACM Classification Sections, Images, Figures, Illustrations, 3rd Party Material Permissions, Bad Breaks, Creating an ACM compliant PDF, Optional accompanying thumbnail image and caption.

Page size

The page size for this ACM publication is US Letter Portrait (8.5×11 inches). Submissions that do not conform to the ACM SIG standards, templates, and formats will be returned to the author for corrections and/or alterations.

File naming scheme

Name your final submission according to the ACM convention: firstauthorname.pdf (e.g. JanetSmith.pdf) using the name of the first author.

Title

Must be in Initial Caps Meaning First Letter of the Main Words Should be Made Capital Letters

Note the Capital Letter “M” in Must, Meaning, and Main

Note the Capital Letter “C” in Caps and Capital

Note the Capital Letter “L” in Letter and Letters

Prefixes: In order to distinguish different paper types, it is mandatory to prefix your title with

Grand Challenge: if your paper belongs to this category

Tutorial: if your paper is a tutorial paper

Demo: if you are presenting a demo

Poster: if your are describing your poster

Industry Paper: if you have a paper in the industry track

Doctoral Symposium: if you have a paper in the PhD Symposium

Authors’ complete names, email, affiliation and affiliation location

Prior to submitting, be sure to update the final version of your PDF to include all authors full names, and correct affiliation names, location, and other information under the title of the paper. See the first page of the ACM sample pdf.

Abstract

Authors must include a brief summary (abstract) of their work in the first section of their submission after the title, authors, and affiliation information on the first page. See the first page of the ACM sample pdf.

References

Authors must include all works cited in their submission in a References section at the end of the paper or extended abstract. See page 4 of ACM sample pdf. Also refer to the ACM citation style and reference formats.

ACM Classification Sections

The Categories and Subject Descriptors and Keywords are mandatory by ACM on the first page of your submission after the Abstract. See the first page of the ACM sample pdf for information about how these two sections should appear in your submission.

Read this section carefully. Your selections for the three sections are mandatory on the submission page when submitting your final version.

Categories and Subject Descriptors (Mandatory for the first page of your paper): Make sure that your selection included on the first page of your paper are also chosen accordingly on the submission page. Click here for information on the ACM Computing Classification Scheme. The new templates enable you to import required indexing concepts for your article from the ACM Computing Classification System (CCS) using an indexing support tool found in the ACM Digital Library (DL) which generates the necessary LaTeX code once you have selected your terms.

Keywords: This section is your (author) choice of terms that you would like used to index your work.

Bad breaks

Be sure you do not have bad page breaks or bad column breaks. One example of a bad column break is a widow, which occurs when the last line of a paragraph that begins at the bottom of one column appears by itself at the top of the next column). If this happens, tighten the previous column to bring it back, or force an additional line of text over to the next column.

Also make sure that Section and Sub-section headings have at least two lines of body text below them when they appear at the end of a page or column.

Third party material

In the event any element used in your material contains the work of third-parties, it is the author/presenter’s responsibility to secure any necessary permissions and/or licenses, and the authors will provide the same permissions in writing to the ACM. If the copyright holder requires a citation to a copyrighted work, it is the authors’ responsibility to include the correct wording and citations to the copyrighted material in their submissions.

Images and figures

Below are some recommendations to ensure good print reproduction of the images, figures, and illustrations utilized in your submission.

Colors and Black & White (Gray Scale) Print Testing. If you have any images in color, please print your paper out in black and white to ensure that the tones and screens used in your images or figures reproduce well in black and white, too. However, your images will appear in full color in any distributed electronic proceedings and in the ACM digital library.

Resolution & CMYK. Figures, charts, and diagrams should use a vector image format (e.g. PDF, SVG). Raster images (e.g. photographs) should be at least 300 or 600 dpi for quality reproduction and saved as .tiff images (or other compatible formats that support print-quality resolution). When creating or revising your images for inclusion in the paper, we recommend choosing CMYK (and not RGB) as the color profile.

TIFF/PNG versus JPG (JPEG) image. For raster images (e.g. photos), TIFFs are preferred for press applications where quality takes priority over file size. When TIFFs are compressed (using LZW compression option when saving from Adobe Photoshop, for example), no image data is lost, thus ensuring maximum quality. A JPEG is a compressed image format designed to keep the file size small, which makes it ideal for use in web graphics. However, to achieve this, the JPEG format actually removes precision from the image. This is referred to as a lossy compression system. On a printout, the removed data tends to show up as blocky areas of a solid color, or ghosting near high-contrast changes. At higher print resolutions (a minimum of 200 dpi), there’s usually enough data in the JPEG file for the compression artefacts to be very noticeable.

Rules/Lines. Rules used in your graphs, tables or charts must be at least 0.5 point in stroke and black for quality reproduction. Finer lines and points than this will not reproduce well, even if you can see them on your laser printed hardcopy when checked — your laser printers will usually have a far lower resolution than the imagesetters that will be used.

Fonts. If your figure uses custom or any non-standard font, the characters may appear differently when printed in the proceedings. Remember to check your figure creation to ensure that all fonts are embedded or included in the figure correctly. Be sure that your images do not contain any Type 3 fonts.

Transparency. If a figure or image is assembled from multiple images, the images must be embedded, and layers be flattened or grouped together properly in the file. Transparency must be flattened.

Page numbering, headers, and footers

Your final submission MUST NOT contain any footer or header string information at the top or bottom of each page, nor any page numbering. The submissions will be paginated in a determined order by the chairs and page numbers added to the PDF during the compiling, indexing, and pagination process.

Acknowledgements

It is the contact or submitting author’s responsibility to be sure that any funding or special contribution acknowledgements are included in the final version submitted as required by any research, financial, or other grants received (by using the “Acknowledgements” section before the References section). See page 4 of the ACM sample pdf.

Submitting the Required Files

When your final version is ready, you need to upload your zip file with PDF and source files using EasyChair. Please try to submit once, rather than submitting many drafts of your final version. As an accepted author, you have access to the proceedings section of EasyChair.

You will see a confirmation screen after a successful upload to EasyChair. As well, a confirmation email will be sent to the contact’s email address entered on the submission page.

If changes are needed, you will be contacted by one of the publication coordinators in case you need to fix something. If this is true, you will receive specific information about how to revise your submission to meet requirements, and a new deadline will be given to submit the corrected material. You are required by the chairs to adhere to this NEW deadline so publication is not delayed.

Questions

If you still have questions or problems about the copyrights and formatting requirements, please email vinay.j.setty@uis.no ideally with the conference name (DEBS 2019) in the subject line.